When turning, the bending machine does not work, driven by the main driving equipment, bearing the circular force and resistance torque. The position of the swivel arm is dragged by the bending device. In actual operation, turn off the electromagnetic brake, start the homing oil motor, turn the origin, turn off the oil motor, turn off the electromagnetic brake, and prepare the next position in advance. Although the part is promoted, it bears circular force and resistance torque. The position of the swivel arm is dragged by the bending device. In actual operation, turn off the electromagnetic brake, start the homing oil motor, turn the rotor to the origin, turn off the oil motor, turn off the electromagnetic brake, and prepare the next position in advance. When the bending machine bends, the rotating arm bears the circular force and resistance torque, and the position of the rotating arm is dragged by the bending machine, and the position speed is 2.2r/min.

When thepipe automation production lineis adjusted and bent for half a time, start the oil motor of the linear module, move the console of the linear module, set the pipe clamp management center in the required specification according to the mark of the linear module, and shut down the oil motor; According to the tooth organization, move the small linear module, fix the small linear module with the positioning pin, rotate the top line, tighten the chuck, and accurately locate the pipe clamp; Start the large linear module motor, move the large linear module console, overlap the pipe clamp management center and the guide wheel equipment management center, and close the motor; Start the hydraulic cylinder motor, clamp the large linear module console, and maintain the accurate positioning of the console (arm rotation management center).

The finishing rolled tube is placed in two groove plates 4, and the hydraulic cylinder 1 is clamped and the die base 3 is clamped. The bending part is operated by the rack AC servo motor, and the bending rotation is operated by the AC servo motor. The actual effect of bending is highly accurate.

The pipe bending machine is mainly composed of large straight line module, arm type driving equipment, arm type, medium straight line module, rotary support, small straight line module and other components. The arm driving device is installed on the side of the large linear module, the arm is fixed on the large slide table according to the rotating support, the middle linear module is fixed on the arm, the large and medium linear module is changed, the distance between the rotating management center and the collet shaft is adjusted, that is, the bending half warp of the pipeline is adjusted. The overall structure principle of the equipment, the actual operation is convenient, automatic technical input, CNC machine tool operation, very accurate and efficient.

pipe automation production line https://www.john-sheng.com/Automatic-Production-Line